PVC Equipment Catalog

Full catalog, 24 pages — browse the index or scroll the page.

All catalogs Download original PDF
Catalog index

World Prime Services' line of machines for fabricating, splicing and finishing PVC/PU belts — air and water-cooled splice presses, finger punchers, slitters, winders, guide/sidewall and high-frequency welders, perforating machines, plus custom guides, sidewalls and cleats.

"All In One" Portable Air Cooling Splice Press PA300-3300

Advantages

  • Portable splice, lightweight, with a flight case as standard packing — easy to bring to any job site.
  • Fast splice: no more than 12 minutes total — 4.5 min heating, 3 min dwell time, 2.5 min cooling.
  • All-in-one design: air-cooling system and compressor integrated in the press itself.
  • Air pressure controller (sets and displays the current pressure), high-quality SMC controller.
  • Air cooling system: energy-saving and environmentally friendly — no scrap material or smoke during operation.
"All In One" Portable Air Cooling Splice Press PA300-3300

Technical Data Sheet

ModelPA300PA600PA900PA1200PA1500PA1500HPA1800
Effective length305mm610mm914mm1219mm1524mm1524mm1829mm
Effective width130mm
Weight, upper part11kg13kg18kg25,5kg30kg53kg47,5kg
Weight, lower part10kg16kg20kg28,5kg30kg45kg63,6kg
Total weight21kg29kg38kg54kg62kg100kg121kg
Overall height220mm225mm
Overall width250mm
Overall length505mm805mm1105mm1405mm1705mm1700mm2005mm
Max pressure2Bar
Max temperature200°C
Power1,6KW2,8KW4,0KW5,3KW6,5KW6,5KW7,6KW
Flight case weight39kg52kg66kg80kg95kg132kg158kg
Gross weight50kg72kg99kg104kg127kg162kg195kg
Package dimension790x430x420mm1090x430x420mm1390x430x420mm1720x450x430mm1990x430x420mm1990x430x420mm2130x450x520mm

Electric Power

VoltagePA300PA600PA900PA1200PA1500PA1500HPA1800
Single PH/110V14A25A35A47A———
Single PH/220V7A12,5A18A23,5A29A29A34A
Three PH/230V5,5A10A14,5A19A23,5A23,5A26,5A
Three PH/380V4A7A10A14A16A16A19A
Three PH/440V3A5,5A8,5A11A14A14A16A

All In One Air Cooling Press PA2400-3300

Same "all in one" family, in a large-format version for very wide belts — reinforced aluminium alloy body.

  • Belt width (max): 2400–3300mm
  • All-in-one design, with built-in controller/air pump and other accessories; allows the upper and lower part temperatures to be set independently, automatic pressurisation and fan air cooling.
  • Reinforced aluminium alloy body
  • Max pressure: 2 Bar
  • Effective heating width: 150mm

Options

  • Pneumatic system lifting press stand
  • Joint accessories: PTFE film & pad, silicone pad set, PVC/PU film, etc.
All In One Air Cooling Press PA2400-3300 Pneumatic lifting press stand for the PA2400-3300 (optional)
Prensas PA2400-3300 prontas na fábrica Prensa PA2400-3300 em laranja na linha de produção Prensas PA2400-3300 sobre bancada na fábrica
ModelPA2400PA2700PA3000PA3300
Effective length2400mm2700mm3000mm3300mm
Effective width150mm
Weight, upper part63kg69kg77kg92kg
Weight, lower part100kg133kg140kg160kg
Total weight163kg202kg217kg252kg
Upper part height370mm380mm400mm440mm
Lower part height (without wheels)345mm380mm405mm
Lower part overall height455mm495mm525mm
Overall length2650mm2950mm3250mm3560mm
Max pressure2Bar
Max temperature200°C
Power8,8KW9,5KW10KW10,8KW
Packing dimension2940x500x720mm3300x600x660mm3390x550x1020mm3690x600x1020mm

New Air Cooling Splice Press PA600-2100

Bench-top line (without an integrated compressor) — same model-name range as the "All In One" portable version, but a different product and structure; check each model's specification before ordering.

Technical Data Sheet

ModelPA600PA900PA1200
Effective length600mm900mm1200mm
Effective width150mm
Weight, upper part19kg32kg38kg
Weight, lower part21kg34kg39kg
Total weight40kg66kg77kg
Overall height320mm
Overall width293mm
Overall length875mm1105mm1425mm
Upper part height250mm
Lower part height190mm
Max pressure2Bar
Max temperature200°C
Power2,2KW3,2KW4,0KW
Flight case weight63kg94kg103kg
Gross weight93kg115kg136kg
Package dimension1185x490x705mm1400x430x410mm1710x430x410mm
ModelPA1500PA1800PA2100
Effective length1500mm1800mm2100mm
Effective width150mm
Weight, upper part43,6kg50kg56,6kg
Weight, lower part45,7kg50kg60kg
Total weight91,5kg105kg119,4kg
Overall height320mm
Overall width293mm
Overall length1725mm2025mm2325mm
Upper part height185mm
Lower part height140mm
Max pressure2Bar
Max temperature200°C
Power5KW6KW7,2KW
Flight case weight125kg142kg162kg
Gross weight178kg199kg230kg
Package dimension1924x456x527mm2224x456x527mm2524x456x527mm

Electric Power

VoltagePA-600PA-900PA-1200PA-1500PA-1800PA-2100
Single PH/110V20A29A36A———
Single PH/220V10A14,5A18A22,5A27A33,5A
Three PH/380VAvailable12A14,5A18,5A

Water Cooling Press — Stainless Steel / Aluminium Alloy Body

Stainless steel body — PB600-1600, water cooling:

Stainless steel body — PB600-1600, water cooling:
ModelPB1100*150PB1300*150PB1600*150
Belt width1000mm1200mm1500mm
Heating platen size1000x130mm1200x130mm1200x130mm
Max temperature200°C
Pressure2Bar
Max belt thickness10mm
Max endless length850mm900mm
Lower part height130mm175mm
Machine weight105kg135kg150kg
Voltage220V, single phase
Power4,5KW5KW5,5KW
Cooling systemWater cooling
Joint time (PU belt)Heating: 20min / Dwell: 3min / Cooling: 3min
Package dimension1940x480x660mm2110x480x660mm2460x480x620mm

Aluminium alloy body — PB1100-1600 (200), water cooling:

Aluminium alloy body — PB1100-1600 (200), water cooling:
ModelPB1100*200PB1300*200PB1600*200
Belt width1000mm1200mm1500mm
Heating platen size1000x170mm1200x170mm1500x170mm
Max temperature200°C
Pressure2Bar
Max belt thickness10mm
Max endless thickness1000mm
Lower part height165mm
Machine weight120kg144kg175kg
Voltage220V/380V380V380V
Power5,5KW6KW6,2KW
Cooling systemWater cooling
Joint time (PU belt)Heating: 20min / Dwell: 3min / Cooling: 3min
Package dimension1940x490x520mm2020x470x620mm2445x490x675mm

Large Water Cooling Press PC2100-4200

Specifications

  • Aluminium alloy body and heating platen
  • Effective heating width of 150mm (200mm also available)
  • Different sizes for belt widths from 2100mm up to 5200mm
  • Rapid cooling system within the platens
  • Heating to 180°C takes about 15-20min; cooling from 180°C down to 60°C takes about 3-5min (depending on press size). Temperature difference between the upper and lower plate is under 3°C.
  • Air pressure: 0 to 0.3 MPa
  • Reliable, automatic temperature control panel with time control
Large Water Cooling Press PC2100-4200
ModelPC2100*150(200)PC2600*150(200)PC3200*150(200)PC4200*150(200)
Belt width2000mm2500mm3000mm4000mm
Effective heating area2000x130mm (200x170mm)2500x130mm (2500x170mm)3100x130mm (3100x170mm)4100x130mm (4100x170mm)
Max temperature200°C
Pressure2Bar
Max belt thickness10mm
Min endless length1000mm1050mm (1300mm)1200mm (1260mm)1200mm (1260mm)
Lower part height212mm252mm (310mm)305mm305mm
Machine weight20kg (as printed in the source PDF)295kg (356kg)460kg (490kg)565kg (620kg)
Voltage220V/380V220V/380V220V/380V380V
Power8KW (9,5KW)11,8KW (15,5KW)12KW (14,4KW)15,6KW (16,3KW)
Cooling systemWater cooling
Joint time (PU belt)Heating: 20min / Dwell: 3min / Cooling: 3min
Package weight298kg (150) / 326kg (200)358kg (150) / 504kg (200)550kg660kg
Package dimension2920x480x780mm3670x490x930mm4090x750x930mm5600x490x930mm

*The original PDF's table lists 20kg for the PC2100 machine weight — well below the other models in the same line; reproduced here faithfully as it appears in the source, though the value looks unlikely for equipment of this size.

Accessories

Machine stand (optional) Heating gun Water pump Standard control box European standard control box (optional)

Pneumatic and Manual Finger Puncher

Pneumatic finger puncher TA1000-2100:

Pneumatic finger puncher TA1000-2100:
ModelTA1000TA1600TA2100
Recommended belt width1000mm1600mm2100mm
Open design, no belt width limit — can be used on wider belts.
Machine dimension1250x650x1680mm1780x650x1700mm2280x650x1700mm
Standard punching board size20x50mm / 15x75mm, other sizes on request
Weight65kg111kg185kg
Gross weight130kg208kg250kg
Packing information1300x670x960mm1800x670x960mm2360x670x960mm

Manual portable finger puncher TC300-1500:

Manual portable finger puncher TC300-1500:
ModelTC300TC600TC900TC1200TC1500
Machine dimension530x390x380mm890x390x380mm1120x390x380mm1450x390x380mm1650x390x380mm
Standard punching board size20x50mm / 15x75mm, other sizes on request
Weight19kg27kg36kg41kg47kg
Packing weight35kg50kg65kg74kg80kg
Packing dimension580x580x480mm1010x500x480mm1260x520x550mm1540x500x540mm1780x520x550mm

Finger Board Selection

Lâmina de puncionamento tipo afiada (Sharp Blade) Lâmina de puncionamento tipo circular (Circular Blade) Lâmina de puncionamento tipo diamante (Diamond Blade)
Sharp BladeCircular BladeDiamond Blade
15x5020x5010x50
15x6020x6010x60
15x7020x7010x70
15x7520x8010x80
15x80——

Finger with bias angle can be customised (90°, 20°, 30° or another angle, on request).

Heavy Duty and Automatic Finger Puncher

Heavy duty finger puncher TC1000H-1800H:

  • Special for thick belts and long fingers, easy to punch.
  • Max finger length: 120mm
  • Max belt thickness: 9mm
  • Easy blade replacement, low cost of consumables
Heavy duty finger puncher TC1000H-1800H: Detalhe do cabeçote de puncionamento do TC1000H-1800H
ModelTC1000HTC1200HTC1400HTC1600HTC1800H
Standard punching size15x100mm
Max belt thickness9mm
Max finger length120mm
Machine weight40kg45kg50kg55kg60kg
Package dimension360x1200x500mm360x1400x500mm360x1600x500mm360x1800x500mm360x2000x500mm

Automatic Belt Finger Puncher Machine TB1000-4000

Specially designed for high-efficiency automatic finger punching; completes the punching of a 3-metre-wide belt in 3-4 minutes. Punch tooth shape: 10x80/20x80mm or other.

Specially designed for high-efficiency automatic finger punching; completes the punching of a 3-metre-wide belt in 3-4 minutes. Punch tooth shape: 10x80/20x80mm or other.
Standard Type
Fully automatic finger puncher TB1000-3500, with stand (optional)
With Stand (Optional)
ModelTB1000TB1600TB2000TB3000TB3500
Power0,75KW1,1KW2,2KW
Voltage220V, single phase
Standard punching size10x80mm e 20x80mm
Max belt thickness8mm (punch thickness can be customised)
Max width1050mm1650mm2050mm3050mm3550mm
Cylinder working pressure0,5–0,8 MPa
External pipe connectionDiameter 14mm
Gross weight369kg457kg730kg893kg1220kg
Package dimension1860x620x990mm2450x620x990mm2860x660x1130mm3940x680x1400mm4630x670x1390mm
Air compressorGas storage capacity 120L, displacement 720L/min
Lâmina de puncionamento personalizada, modelo 1 Lâmina de puncionamento personalizada, modelo 2 Lâmina de puncionamento personalizada, modelo 3

The finger punching blade can be customised.

Longitudinal Splice Press

Air cooling splice press for longitudinal joints on PVC/PU conveyor belts — model PA-1500:

  • Machine designed for longitudinal joints on PVC/PU conveyor belts.
  • Fast splice: combined with the air cooling press, splicing time is between 10 and 20 minutes.
  • No limit on width or length.
Air cooling splice press for longitudinal joints on PVC/PU conveyor belts — model PA-1500:
ModelPA-1500
Jointing length1500mm
Jointing width150mm
Top plate weight46kg
Bottom plate weight49kg
Machine weight95kg
Press body length1730mm
Press top plate height250mm
Press bottom plate height140mm
Joint press height320mm
Press top plate width230mm
Press bottom plate width295mm
Max press working pressure2Bar
Max temperature200°C
Machine dimension2800x950x1850mm
Total machine weight1100kg
Power5KW

*The belt support rack is optional.

Rack de apoio da correia para emenda longitudinal (opcional)

TC200T — manual finger puncher for timing belts:

  • Eliminates the need for reworking steel-cable belts after cutting.
  • Delivers precise cuts on belts with unique coatings.
  • Portable, manual and user-friendly.
  • Suitable for cutting belts up to 14mm in thickness.
  • Features interchangeable blades and blade sizes.
TC200T — puncionador manual de dedos para correias dentadas
Belt typePVC/PU / Transmission belt / Timing belt
Max belt width200mm
Max belt thickness14mm
Punch head15x120mm (sharp blade)
Machine dimension550x240x390mm
Net weight22,5kg

Ply Separator and Slitter

Belt Ply Separator SC130 and SB130

European type, BONFIGLIOLI motor (SC130) and economy type (SB130) — removes the ply layer from the belt without damaging the rest of the structure.

Separador de lonas SC130, motor BONFIGLIOLI Separador de lonas SB130, versão econômica

Options

Stand — optional accessory for the SC130 Flight case — optional accessory for the SC130 Blade — optional accessory for the SC130 Step cutter — optional accessory for the SC130 Blade — optional accessory for the SB130 Roller — optional accessory for the SB130
SpecificationSC130SB130
MinimumMaximumMinimumMaximum
Split width40mm130mm40mm130mm
Upper part split thickness0,35mm8mm0,5mm8mm
Lower part split thickness0,35mm5mm0,5mm5mm
Max belt thickness—10mm—10mm
Power370W750W
Voltage220V / 380V
Optional accessoriesStand / Flight case / Blade / Step cutterBlade / Roller
Machine weight52kg46kg
Gross weight66kg76kg
Package dimension720x550x500mm710x620x480mm

PVC/PU Belt Slitter Without Winder CA2000-3200

Cuts the belt longitudinally into narrower widths.

Cuts the belt longitudinally into narrower widths.
Fatiadora CA2000-3200 na linha de produção da fábrica Detalhe dos rolos e lâminas da fatiadora CA2000-3200 na fábrica
ModelCA2000CA3200
Machine dimension2480x1070x1020mm3500x1070x1020mm
Max belt thickness10mm
Blade quantity5 unid.
Work table width380mm
Machine weight420kg640kg
Packing weight470kg720kg
Packing dimension2670x1100x1420mm3690x1100x1420mm
Power0,75KW
Max working speed47 rotações/min
Max belt width2000mm3200mm

Conveyor Belt Winder CAW2000-3500W

  • The standard winder can bear a 1000kg, 1000mm-diameter conveyor belt roll — can be customised on request.
  • Working voltage: 380V three-phase.
  • The standard winder is equipped with a 70x70mm square shaft. *Optional: 70-110mm square shaft, 70-150mm-diameter round hole.
Diagrama esquemático da rebobinadeira de correias CAW2000-3500W Conveyor Belt Winder CAW2000-3500W Rebobinadeira de correias CAW2000-3500W, vista lateral em operação
SpecificationCAW2000CAW3200CAW3500
Belt width2000mm3200mm3500mm
Voltage220V / 380V
Max belt diameter1200mm (or on request)
Max load capacity1300kg1700kg1700kg
Power0,75KW1,1KW1,1KW

Rack with Rollers for Rolls of PVC/PU Conveyor Belt

World Prime Services provides racks for rolls of conveyor belt material tailored to your business — almost any configuration is possible.

Rack com roletes para rolos de correia, renderização 1 Rack com roletes para rolos de correia, renderização com dois tamanhos Rack com roletes, vista frontal em render
Racks com roletes verde e azul prontos na fábrica Desenho técnico com as dimensões do rack de roletes

Slitter Machine With Winder And Rewinder CA2000H-3000H

Combines longitudinal cutting and rewinding in a single machine — World Prime Services' slitter is designed for the longitudinal cutting of PVC, PU and rubber conveyor belts, with a maximum belt diameter of 1800mm and a permissible weight of 1500-2000kg, for working widths of 2000mm and 3200mm.

Slitter Machine With Winder And Rewinder CA2000H-3000H
Control panel Electric correction Working table Protective device

Specifications

  • Increases winder motor power, making it easier to cut conveyor belts.
  • Protective devices for the hands, such as 6 emergency stop switches and an anti-cutting laser sensor.
  • Improved fuselage metal material and thickness, to increase load-bearing capacity.
  • Air shafts added to the winders, suited to circular rollers.
  • Electric correction system on both winders, which moves the winders left/right to keep the belt straight.
  • Includes a belt working table.
  • Includes a control panel for the cutting section — both winders let you easily adjust the running speed of each part.
SpecificationCA2000HCA3000H
Belt width2000mm3000mm
Slitter power0,75KW
Winder power0,75KW2,2KW
Winder load capacity1000-1500kg1500-2000kg
Max roll diameter1000mm1200mm
Work table dimensions2000x1000mm3000x1000mm
Speed47 rotações/min

6-Ton Winder and Circular Blade Slitter

Heavy-duty 6-ton conveyor belt winder — CAW2000H:

Heavy-duty 6-ton conveyor belt winder — CAW2000H: Rebobinadeira CAW2000H instalada na fábrica, vista geral da estrutura
Machine dimension3510x1800x1700mm
Power5,5KW
Voltage380V
Max belt width2000mm (other sizes also available)
Max belt roll diameter2200mm
Output torque5700 Nm
Maximum speed4,4 RPM
Max load capacity6 tons
Square shaft size150x150mm or other sizes available

Belt cutting slitter with circular blades CB600-1200 — precision cutting:

Belt cutting slitter with circular blades CB600-1200 — precision cutting:
Detalhe da lâmina circular em operação Detalhe do sistema de corte
SpecificationCA600CA1200
Machine dimension1300x620x1180mm1900x620x1180mm
Working area width600mm1200mm
Max belt thickness10mm10mm
Min belt length1000mm1000mm
Min cutting width3mm3mm
Standard accessories5 blades, allow the cutting width to be adjusted
Voltage220V/380V
Power0,93KW
SpeedAdjustable
Net weight260kg290kg
Gross weight301kg345kg
Package size1420x710x1360mm1960x710x1360mm

Guide and Sidewall Welding Machine

Belt guide / sidewall welding machine QB2000S-3000S:

Belt guide / sidewall welding machine QB2000S-3000S:
Power12KW
Recommended voltage380V trifásico
Max sidewall wave height60mm
Max sidewall height100mm
Maximum speed4,7 m/min
Min belt circumference2000mm
Track lengthGenerally in multiples of 3
Machine dimension3000x2500x1750mm
Standard guide device2 conjuntos
Standard sidewall device1 set
Standard tension rack1 pc
Standard belt supporting rack1 set
Standard belt tension motor1 pc
Heat gun for guideWELDY 1.6KW x 2 sets
Heat gun for sidewallLHS 41L SYSTEM400 4.4KW, with 70x10 nozzle
BlowerROBUST 3x230V / 400V

Belt guide welding machine QB1000-1500:

Belt guide welding machine QB1000-1500:
ModelQB1000QB1200QB1500
Belt width1000mm1200mm1500mm
Power0,55KW
Max running speed4m/min
Voltage220V / 380V / customisation
Standard guide wheel8*5+10*6
Optional guide wheel17*11, 22*14 or on request
Heating gun holder1 conjunto1 conjunto2 conjuntos
Optional accessory1600W heating gun / Grinding head / Gun holder / Guide wheel
Package dimension2210x965x1575mm3120x970x1570mm2280x810x1230mm
Gross weight295kg343kg470kg

New guide welding machine QB1300H-2000H — reinforced version:

New guide welding machine QB1300H-2000H — reinforced version:
ModelQB1300HQB2000H
Max belt thickness10mm
Min endless length2000mm
Max running speed0,2m/s
Voltage220V / 380V / customisation
Machine power0,85KW
Heating gunWeldy 1.6KW
Belt grinding device2 unid.
Belt glue device2 unid.
Guide wheels(6*4 / 8*5 / 10*6 / 13*8 / 17*11 / 22*14) x 2 sets
Machine dimension2120x845x1335mm2890x845x1335mm
Package dimension2210x965x1575mm3120x970x1570mm
Gross weight626kg1087kg

Belt edge sealing welding machine QD1200-1500:

Belt edge sealing welding machine QD1200-1500:
ModelQD1200QD1500
Power1,6KW2KW
Sealing time3,5–5min
Min belt thickness0,8mm
Max belt thickness5mm
CoolingAir cooling
Effect size (belt edge thickness / 2)E.g.: 0.8mm : 0.8mm/2 = 0.4mm
Machine dimension1370x622x1295mm1670x622x1295mm
Endless belt min circumference2800mm3400mm
PU belt working timeHeating 90s / Dwell 10s / Cooling 200s
PVC belt working timeHeating 120s / Dwell 10s / Cooling 170s
Package dimension1570x870x1280mm1870x870x1530mm
Gross weight523kg580kg

Advantages

The PropertiesThe Advantage
10-12 cylinders for even pressure supplyGood flatness, no indentation around the edge.
No additional material neededNo need to pre-prepare edges — 0.8mm can also be sealed.
Moveable working tableMore convenient to fix the conveyor belt, improves efficiency.
Hollow-out designConvenient to check the weld position on the conveyor belt.
Different sizes available1200-1500mm models for regular conveyor belts.
Air cooling3-5min for quick belt sealing.
High-temperature-resistant Teflon beltRounded edges, reduce the friction of belt sliding.
PLC controlHeating/dwell/cooling time can be set — easy to operate and the whole process is automatic.

Belt Perforating Machine TD1100-3200

Specifications

  • Belt width (max): 1000-3100mm
  • Belt material: PVC/PU
  • Belt thickness (max): 10mm
  • Hole type: round, from 3mm up to 20mm
  • Minimum belt perimeter: 800mm
  • Adjustable punching speed: 80-120 holes per minute
  • Options: different blade size / protection cover / vacuum cleaners
Belt Perforating Machine TD1100-3200

Technical Data Sheet

ModelTD1100TD1600TD2100TD2600TD3200
Belt width≤1100mm≤1600mm≤2100mm≤2600mm≤3200mm
Protection cover (optional) — drilling area ≤1000mm1500mm2000mm2500mm3100mm
Power3,5KW
Voltage220V, single phase
Belt typePVC/PU
Max belt thicknessStandard 10mm maximum, enhanced machines can reach up to 15mm
Drill speed2 holes/second (the speed is affected by the hole spacing)
Hole size3-20mm (3 blades included free, you can choose from 3mm to 15mm)
Min belt length800mm
Min drill errorThe drilling error over 1000mm of belt length is 0.1mm (the error can be calibrated through the program)
Machine weight815kg915kg1015kg1115kg1300kg
Machine size1950x1000x1600mm2450x1000x1600mm2950x1000x1600mm3450x1000x1600mm4050x1000x1600mm
Components1.8KW vacuum cleaner; toolbox x1, PE pad x1, wrenches x2, jack x1, chucks x2
Package dimension2300x1170x1820mm2600x1180x1830mm3040x1160x1820mm3610x1240x1780mm4260x1160x1820mm
Package weight832kg941kg1088kg1241kg1835kg

New Upgrade — Easy Drill Mode

The machine can read CAD files and punch holes at any position on the belt according to the punching drawing.

Desenho de furação com posições customizadas Correia perfurada conforme o desenho CAD

Temperature Splice Presses

The three presses below also appear in the Small Tools Catalogue, extracted from the same pages of this source PDF — the data below is identical in both catalogues.

Belt Splice Press With Temperature Controller

Belt Splice Press With Temperature Controller
ModelQD200*200QD200*400
Max belt width200mm400mm
Heating width200*200mm200*400mm
Max temperature200°C
Heating platenDouble side heating (independent temp. control)
Cooling methodBy air compressor
Voltage110V/220V220V
Net weight24kg66kg
Package dimension450*350*510mm640*360*570mm
Package weight35kg77kg

Heating Splicing Clamps For Melt Splices

Heating Splicing Clamps For Melt Splices
ModelQD50*50BQD85*150BQD120*180QD90*270
Max belt width42mm75mm110mm260mm
Heating width50*50mm85*150mm120*180mm90*270mm
Standard mold width11/12mm50mm80mm100mm
Max temperature200°C
Voltage110V/220V220V
Heating platen Double side heating Double side heating Double side heating (independent temp. control)
Cooling method Cooling clamp By air compressor
Net weight1.6kg3.1kg5.9kg10.1kg
Package dimension390*130*320mm450*180*360mm540*200*330mm680*260*330mm
Package weight3.3kg5.6kg8.6kg15.1kg

Classic Press With Fixed Temperature

Classic Press With Fixed Temperature
ModelQD60*80SQD100*150SQD160*250S
Belt width80mm150mm250mm
Thickness3mm
Heating width60*80mm100*150mm160*250mm
Voltage110V/220V220V
Fixed temperature105°C115°C120°C
Net weight1.4kg5.1kg14.5kg
Package dimension290*70*110mm390*150*160mm450*260*300mm
Package weight1.7kg5.8kg20kg

Finger Puncher, Skiving Machine and PTFE Welder

The three machines below also appear in the Small Tools Catalogue, extracted from the same pages of this source PDF — the data below is identical in both catalogues.

Manual Finger Punching Tool TC100-200

Manual Finger Punching Tool TC100-200
ModelTC100TC200
Max belt width100mm200mm
Finger size120×10mm, 100×10mm, 80×10mm, 60×10mm
Net weight32kg44kg
Package dimension540*360*500mm660*360*500mm
Package weight43kg56kg

Transmission Belt Skiving Machine SD150-600

Transmission Belt Skiving Machine SD150-600
  • Manual type
  • Meets your demands for different belts in different thicknesses
  • For belt thickness: 1–6mm
  • Rotational speed: 650 r/min
  • Working voltage: 220V, single phase
ModelSD150SD200SD300SD400SD500SD600
Power0.75KW1.1KW2.2KW2.2KW3.2KW3.3KW
Max belt width150mm200mm300mm300mm500mm600mm
Skiving length100mm150mm150mm150mm150mm150mm
Machine bodyAluminum alloy body; with frequency inverter and speed control.
Net weight35kg57kg100kg130kg145kg159kg
Package dimension480*480*600mm560*490*680mm660*590*780mm690*660*780mm790*660*780mm890*660*780mm
Package weight46kg72kg129kg150kg175kg190kg

SD200P — Portable type

  • Max belt width: 200mm
  • For belt thickness: 1–6mm
  • Recommended drill: GBM 13 RE Bosch
  • Package dimension: 450*430*310mm
  • Net weight / gross weight: 18kg / 26kg

PTFE Belt Welding Machine QD130-200

PTFE Belt Welding Machine QD130-200

*Remark: other sizes can be customized, such as 400mm, 500mm, 600mm.

Model QD130-7PQD150-7PQD200-7PQD130-10PQD150-10PQD200-10P
Heating dimension70x130070x150070x2000100x1300100x1500100x2000
Voltage380V, 3-phase
Power0.6KW0.9KW1.2KW0.6KW0.9KW1.2KW
Temperature range50~400°C
Delay time0~99s
Pressure0.3~0.5 Mpa
Net weight460kg500kg600kg460kg500kg600kg
Package dimension1900x1000x1780mm2000x1000x1780mm2300x1000x1780mm2000x1300x1050mm2200x1300x1050mm2700x1300x1050mm

High Frequency Belt Welding Machine QA1000-2000

Specifications

  • HF power output: from 10KW to 13KW
  • Stable high-frequency output
  • Input power: 18KW
  • Working frequency: 27.12 MHz
  • Power supply: 380V three-phase, 50Hz
  • Serious protection: current-resistance protection
  • Spark protection and emergency-brake protection
  • Universal for T-Cleats, X-Cleats, L-Cleats, sidewall profiles, V-Guides, etc.
  • Automated HF weld cycles
  • Easy setup and operation
  • Fully HF-shielded, whole machine under protection
High Frequency Belt Welding Machine QA1000-2000
Modelo QA1000 Modelo QA1000H Modelo QA2000
ModelQA1000QA1000HQA2000
Belt widthNo limit1050mm1350mm
Power10KW10KW13KW
Top heating plate size500*400mm650*500mm800*400mm
Bottom heating plate size700*800mm700*1200mm1500*600mm
Control systemControl box on machineControl box on machineIndependent control box
Current adjustment modeRotating knobs, adjustableRotating knobs, adjustableElectric frequency modulation
Max cleat length500mm800mm1000mm
Max sidewall length500mm500mm500mm
Upper plate thickness30mm30mm40mm
Upper plate travel distanceAprox. 200mmAprox. 200mmAprox. 250mm
Protection cover——Stainless steel + aluminium frame structure (cylinder driven)
Machine dimension1500*900*2060mm1650*850*2050mm1950*950*2000mm
Package dimension1900*1350*2270mm1840*970*2200mm2200*1050*2120mm
Gross weight990kg800kg1330kg

Guide and Sidewall Specifications

Guide and Sidewall Specifications

Colours available for guides and sidewalls: white, green, yellow, blue, grey, dark green and transparent.

Specification List — Guide

ModelSize B×H (mm)Material
PVC Guide4×2PU
5×3PVC/PU
6×4PVC/PU
8×5PVC/PU
10×6PVC/PU
13×8PVC/PU
17×11PVC/PU
22×14PVC/PU
30×16PVC
Square Guide5×5PVC
8×8PVC
10×10PVC
12×12PVC
15×15PVC
20×20PVC
25×25PVC

Specification List — Sidewall

Class (mm)Height (mm)Width (mm)Min. dia. (mm)Working temperature
3,0202860(-10 / +70°C)
30-403580
50-7045100
5,050-6050120
70-8050150
90-10050180

Cleat Specifications

Cleat Specifications

Colours available for guides and sidewalls: white, green, yellow, blue, grey, dark green and transparent.

Cleat shapeModelHeight (mm)Width (mm)
PVC Cleat (T)T101010
T202018
T303025
T404025
T505025
T606025
T707035
T808035
T909035
T10010035
T12012045
T15015045
PVC Cleat (X)X202018
X303025
X404025
X505025
X606025
X707035
X808035
X909035
X10010035
X12012040
PVC Cleat (W)W303025
W404025
W505025
W606025
PU Cleat (T)T101010
T202014
T303014
T404014
T505014
T606015
T707016
T808016

Homogeneous Belt Joint Machine PD600-1200

Homogeneous Belt Joint Machine PD600-1200 Máquina de emenda homogênea PD600-1200 na maleta (flight case) Máquina de emenda homogênea PD600-1200 na maleta, vista angulada
ModelPD600PD900PD1200
Belt thickness0,8–5,0mm
Splice time3–5min
Effective heating width600mm900mm1200mm
Working timeHeating: 6s / Dwell: 10s
Max temperature200°C
Power1,35KW1,8KW2,35KW
Machine dimension1020x335x250mm1320x335x250mm1620x335x250mm
Voltage220V, single phase
Net weight38kg47kg56kg

Butt Joint

The joint machine is designed to splice positive drive belts. Interchangeable templates ensure accurate cut length and pitch of positive drive belts. A joint is completed in 3-5 minutes.

Correia positive-drive com emenda de topo (butt joint)

For Puncher Belt Fingers

The high-precision finger cutter is suitable for positive drive belts and can be used flexibly with different cutter heads. Max belt thickness around 9mm. Lightweight, ideal for assembly and service equipment. Multiple blade sizes available, with belts up to 1600mm.

Cortador de dedos de alta precisão para correias positive-drive Detalhe dos dedos puncionados em correia positive-drive
ModelTC1000HTC1200HTC1400HTC1600HTC1800H
Standard punching size15x100mm (or on request)
Max belt thickness9mm
Max finger length120mm

For Welding Belt

Finger Joint

Customised bottom plate for the customer's specific positive drive belt tooth pitch. It is possible to joint positive drive belts just like normal light-duty belts, with simple handling and a high joint success rate. With this joint method, the positive drive belt gets a 100% closed surface, a homogeneous thermoplastic structure, and is available in smooth and textured surfaces.

Finger joint on a positive drive belt — manual punching, cutting template and portable tool

Profile Welding on Positive Drive Belts

Cleats & Sidewalls

Angled and bent cleats made of TPU with high-frequency welding technology. Cleat mold. Can be combined with cleats to make pockets for product elevation on steep angles or vertical surfaces.
  • Angled and bent cleats made of TPU with high-frequency welding technology.
  • Cleat mold.
  • Can be combined with cleats to make pockets for product elevation on steep angles or vertical surfaces.

*You can also contact us for positive drive belt processing needs.

Perforating On Positive Drive Belt

Machine specially designed for perforating the center positive drive belt.

Perforating On Positive Drive Belt
Correia positive drive perfurada sob medida, montada na máquina

Advantages

  • Various perforation solutions — single row, double rows, etc. Adjustable perforation depth.
  • Special roller to adapt to the tooth pitch and ensure smooth movement of the center positive drive belt on the working table.
Download original PDF Back to catalogs

Need a quote for this equipment?

Talk to our team and get a tailored proposal.

Talk to a specialist